Intrigue V6-3.8L VIN K (1998)
Engine Block Heater: Description and Operation
The optional engine coolant heater (RPO KO5) is designed to warm the engine coolant in the engine block area for improved starting in very cold
weather (-29°C/-20°F). The use of the coolant heater helps reduce fuel consumption when a cold engine is warming up. The engine coolant heater coil
is rated at 600 watts and uses a 110 volt AC external power supply.
The coolant heater consists of a small electrical heating element and block inserted through a water jacket hole in the engine block. This heating block
is precisely machined. The heating block uses a rubber O-ring to seal the coolant passage. A cord plugs into the outside of the coolant heater and is
strapped onto the engine wiring harness. The plug end of the cord and extra cord are located under the hood in the left front corner of the engine
compartment. The cord is extended and plugged into a grounded electrical receptacle close to the vehicle. A weather shield on the end of the cord is
provided to protect the plug when not in use. Care should be taken to secure the extra length of cord when not in use. The cord should be inspected
periodically for serviceability.
