Intrigue V6-3.8L VIN K (1998)
14. Install the connecting rod cap bolts.
^
Tighten the connecting rod bolts to 27 Nm (20 ft. lbs.). Use the J 36660 in order to rotate the bolts an additional 50 degrees.
NOTICE: Refer to Fastener Notice in Service Precautions.
15. Pry the connecting rod back and forth with a suitable tool and check for binding. If necessary, loosen and retighten the bearing cap.
16. Measure the connecting rod side clearance.
17. Install the cylinder head.
18. Install the oil pan.
