Intrigue V6-3.8L VIN K (1998)
2. Install the left (front) valve rocker arm cover.
3. Apply thread lock compound GM P/N 12345493 or equivalent, to the valve rocker arm cover bolt threads.
4. Install the left (front) valve rocker arm cover bolts.
^
Tighten the left (front) valve rocker arm cover bolts to 10 Nm (89 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
5. Install the left (front) spark plug wire cover to the left (front) valve rocker arm cover.
6. Connect the left (front) spark plug wires.
7. Install the right engine mount strut bracket.
8. Install the fuel injector sight shield. Refer to Engine Cover Replacement See: Service and Repair
9. Install the engine lift bracket to the exhaust manifold studs.
^
Tighten the engine lift bracket bolt and nut to 30 Nm (22 ft. lbs.).
10. Connect the battery ground (negative) cable.
11. Inspect for proper fluid levels.
12. Inspect for oil leaks.
