Intrigue V6-3.8L VIN K (1998)
Water Pump: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
-
J 36660 Torque Angle Meter
1. Partially drain the engine coolant from the cooling system.
2. Loosen the water pump pulley bolts.
3. Remove the drive belt.
4. Remove the water pump pulley bolts.
5. Remove the water pump pulley.
6. Position aside the power steering pump.
7. Remove the water pump bolts.
8. Remove the water pump.
9. Remove the water pump gasket.
10. Clean and inspect the water pump mating surfaces.
INSTALLATION PROCEDURE