Intrigue V6-3.8L VIN K (1998)
Blower Motor Resistor: Service and Repair
Removal Procedure
1. Disconnect the battery negative cable.
2. Remove the right side instrument panel insulator.
3. Disconnect the electrical connectors from the blower motor resistor.
4. Disconnect the blower motor resistor electrical connector from the blower motor.
5. Loosen, do not remove, both forward screws. The blower motor resistor opening is slotted as access is extremely limited.
6. Remove the rearward screw.
7. Remove the blower motor resistor.
Installation Procedure
1. Install the blower motor resistor.