Intrigue V6-3.8L VIN K (1998)
Important: Securely hand-tighten the handle of the J23128-A. Do not use a wrench or pliers.
6. Fully engage the knurled tangs of the J23128-A into the recessed portion of the seal by turning the handle clockwise.
7. Remove the seal from the compressor using a rotary-pulling motion. Discard the seal.
8. Remove the seal O-ring from the compressor neck using the J 9553-01. Discard the seal O-ring.
9. Inspect the shaft and the inside of the compressor neck again for dirt and foreign material.
10. Ensure that the shaft and the inside of the compressor neck are perfectly clean prior to installing new parts.
