Intrigue V6-3.8L VIN K (1998)
Heater Hose: Service and Repair
Outlet Pipe Adapter
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
1. Drain the cooling system.
2. Remove the fuel injector sight shield. Refer to Engine Cover Replacement See: Engine, Cooling and Exhaust/Engine/Service and Repair.
3. Remove the heater outlet hose from the pipe adapter.
4. Use J 38185 in order to position aside the heater hose clamp.
5. Remove the pipe adapter mounting bolt.
6. Remove the pipe adapter.
Installation Procedure
1. Lubricate the O-ring.
2. Install the pipe adapter.