Intrigue V6-3.8L VIN K (1998)
Control Module HVAC: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the right side instrument panel insulator.
3. Disconnect the electrical connector from the blower motor control module.
4. Disconnect the blower motor control module electrical connector from the blower motor.
Important: The opening to the blower motor control module is slotted. Access to the blower motor control module opening is limited.
5. Loosen both of the forward screws.
6. Remove the rearward screw.
Important: Tilt down the rear of the blower motor control module.
7. Remove the blower control module.
Installation Procedure
Important: Align the blower motor control module forward retaining slots onto screws and seat against HVAC module.