Oldsmobile Workshop Service and Repair Manuals

Center Mounted Brake Lamp: Service and Repair
High Mounted Stop Lamp Replacement

REMOVAL PROCEDURE

High Mounted Stop Lamp Replacement: Without Spoiler - Removal Procedure

1. Remove the rear window trim panel.
2. Rotate the high-mounted stoplamp sockets counterclockwise to release from the high-mounted stoplamp.
3. Remove the screws retaining the high-mounted stoplamp.
4. Remove high-mounted stoplamp from the rear window trim panel.

INSTALLATION PROCEDURE

High Mounted Stop Lamp Replacement: Without Spoiler - Installation Procedure

1. Install the high-mounted stoplamp to the rear window trim panel.
2. Install the high-mounted stoplamp to rear window trim panel retaining screws.

Tighten
Tighten the high-mounted stoplamp to rear window trim panel retaining screws to 2 N.m (18 lb in).

3. Install the lamp sockets to the high-mounted stoplamp, then rotate clockwise to secure.
4. Install the rear window trim panel.