Intrigue V6-3.8L VIN K (1998)
8. Install a clear plastic bleeder hose to the ABS modulator REAR bleeder valve (1).
9. Submerge the opposite end of the clear plastic bleeder hose in a clean container partially filled with clean brake fluid.
10. Slowly open the ABS modulator bleeder valve in order to allow the brake fluid to flow.
11. Close the ABS modulator bleeder valve when air bubbles are no longer detected in the fluid.
12. Remove the clear plastic bleeder hose from the ABS modulator bleeder valve.
-
Tighten the previously bled ABS modulator bleeder valve to 9 Nm (80 inch lbs.).
13. Install the clear plastic bleeder hose to the ABS modulator RIGHT FRONT bleeder valve (2).
14. Repeat Steps 9 through 11.
IMPORTANT: Use a shop cloth in order to catch escaping brake fluid.
15. Slowly open the FRONT ABS modulator brake pipe fitting (1) in order to allow the brake fluid to flow.
16. Close the ABS modulator brake pipe fitting when air bubbles are no longer detected in the brake fluid.
-
Tighten the ABS modulator brake pipe fitting to 24 Nm (18 ft. lbs.).
