Intrigue V6-3.8L VIN K (1998)
1. Install the new strainer (4) to the reservoir.
2. Support the reservoir with one hand and grasp the strainer with the other hand twisting the strainer into position.
3. Reinstall the fuel sender assembly.
Caution: Refer to Battery Disconnect Caution in Cautions and Notices.
4. Connect the negative battery cable.
5. Inspect for fuel leaks:
5.1. Turn the ignition switch ON for 2 seconds.
5.2. Turn the ignition switch OFF for 10 seconds.
5.3. Turn the ignition switch ON.
5.4. Check for fuel leaks.
6. Reinstall the fuel injection sight shield. Refer to Engine Cover Replacement See: Engine, Cooling and Exhaust/Engine/Service and Repair.
