Intrigue V6-3.8L VIN K (1998)
Heater Hose: Service and Repair
Heater Hoses
Tools Required
J38185 Hose Clamp Pliers
Removal Procedure
1. Drain the cooling system.
2. Remove the fuel injector sight shield. Refer to Engine Cover Replacement See: Engine, Cooling and Exhaust/Engine/Service and Repair.
3. Use J 38185 in order to position aside the heater core inlet and/or outlet hose clamp.
4. Disconnect the heater inlet hose and/or the outlet hose from the heater core.
5. Use J 38185 in order to position aside the heater hose inlet and/or outlet clamp.
6. Disconnect the heater inlet hose and/or the outlet hose from the pipe adapter.
7. Remove the heater inlet hose and/or the outlet hose.