Intrigue V6-3.8L VIN K (1998)
Power Steering Line/Hose: Service and Repair
Cylinder Line Assemblies/O-Ring Seals Replacement
DISASSEMBLY PROCEDURE
1. Loosen both cylinder line fittings (1) on the (3) cylinder end of the gear assembly.
2. Loosen both fittings on the cylinder line assemblies (3) at the valve end of the gear assembly.
3. Remove both cylinder line assemblies (1) from the rack and pinion gear assembly (2).
4. Remove the O-ring seals (1) from the valve end of line.
5. Discard the O-ring seals (1).
ASSEMBLY PROCEDURE
1. Inspect the cylinder lines (1) for the following items:
^
Cracks
^
Dents