Intrigue V6-3.8L VIN K (1998)
Tighten
Tighten the wiring harness connector bolts to 7 N.m (62 lb in).
Junction Block Replacement: Accessory Wiring - Installation Procedure
9. Connect the three instrument panel wiring harness connectors.
Junction Block Replacement: Accessory Wiring - Installation Procedure
10. Position the junction block into the junction block bracket.
11. Snap the junction block to the bracket.
12. Replace the top cover and tighten using the center knob it fuses were accessed.
13. Install the battery positive cable to the top of the underhood accessory wiring junction block.
14. Install the negative battery cable.