Intrigue V6-3.8L VIN K (1998)
7. Disconnect the fuel feed pipe threaded fitting on the engine-side of the in-pipe fuel filter.
8. Cap the in-pipe fuel filter pipe, the fuel feed pipe, and the fuel return pipe as needed to stop any fuel leakage.
9. Remove the fuel feed, fuel return, and EVAP pipe attaching hardware and the fuel feed, fuel return, and EVAP pipes.
10. Note the position of the fuel and EVAP pipes and the fuel and EVAP pipe attaching hardware for installation.
11. Inspect the pipes for bends, kinks and cracks.
12. Repair or replace the pipe or pipes as required.
Installation Procedure
WARNING: In order to Reduce the Risk of Fire and Personal Injury: If nylon fuel pipes are nicked, scratched or damaged during installation,
they must be replaced.
Notice: Always re-attach the fuel lines and fuel filter with all original type fasteners and hardware. Do not repair sections of fuel pipes.
