Intrigue V6-3.8L VIN K (1998)
Air Flow Meter/Sensor: Service and Repair
MAF Sensor Replacement
The MAF sensor on this engine is attached to the throttle body assembly.
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the MAF sensor electrical connector.
3. Remove the screws holding MAF sensor to throttle body.
4. Remove the MAF sensor from the throttle body.
Installation Procedure
1. Carefully position the MAF sensor to the throttle body.
2. Install the screws holding the MAF sensor to the throttle body.
3. Connect the MAF sensor electrical connector.
4. Connect the negative battery cable.