oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Oil Pressure Switch (For Fuel Pump) > < Fuel Pressure Sensor/Switch|Diagrams|Page 4260
Page 2
background image

3. Reinstall the fuel sender access panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Reinstall the (7) nuts retaining the fuel sender access panel.

-

Tighten the fuel sender access panel nuts to 10 N.m (8 lb ft)

5. Reinstall the trunk liner.
6. Reinstall the spare tire the jack, and the spare tire cover.
7. Connect the negative battery cable.

Oil Pressure Switch (For Fuel Pump) > < Fuel Pressure Sensor/Switch|Diagrams|Page 4260