Intrigue V6-3.8L VIN K (1998)
5. Install the Connector Position Assurance (CPA) to the driver yellow 2-way connector located at the base of the steering column.
6. Install the left instrument panel insulator. Refer to Insulator Replacement - Instrument Panel (IP) in Instrument Panel, Gauges and Console.
7. Install the AIR BAG fuse to the fuse block.
8. Install the right instrument panel cover. Refer to IP Endcap Replacement in Instrument Panel, Gauges and Console.
9. Staying well away from both air bags, turn the ignition switch to the RUN position.
9.1. The AIR BAG warning lamp will flash seven times.
9.2. The AIR BAG warning lamp will then turn OFF.
10. Perform the SIR Diagnostic System Check if the AIR BAG warning lamp does not operate as described.
