Intrigue V6-3.8L VIN K (1998)
Seat Belt: Service and Repair
Rear Center Seat Belt Replacement
Removal Procedure
1. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
2. Remove the center seat belt nuts.
3. Remove the center seat belts from the vehicle.
Installation Procedure
Important: Verify that the rear seat belt anchors are installed in their proper orientation.
1. Install the center seat belts to the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the center seat belt nuts.
Tighten
Tighten the center seat belt nuts to 42 N.m (31 lb ft).
Important: Be sure to route the buckle correctly through the seat cushion.
3. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.