Intrigue V6-3.8L VIN K (1998)
Tighten
Tighten the intermediate steering shaft upper bolt to 48 Nm (35 ft. lbs.).
2. Install the intermediate steering shaft seal onto the steering column.
3. Install the bolt at the power steering gear stub shaft (2).
Tighten
Tighten the power steering gear stub shaft bolt to 48 Nm (35 ft. lbs.).
4. Install the intermediate steering shaft seal onto the power steering gear.
5. Install the left instrument panel insulator. Refer to INSULATOR REPLACEMENT - IP in INSTRUMENT PANEL, GAUGES AND WARNING
INDICATORS.
