Intrigue V6-3.8L VIN K (1998)
CAUTION: To avoid serious personal injury when applying any two part component paint system, follow the specific precautions
provided by the paint manufacturer. Failure to follow these precautions may cause lung irritation and allergic respiratory reaction.
6. Finish the wheel with Ditzler Delclear Acrylic Urethane and Ditzler Ultra-Urethane Additive or equivalent using three coats. Refer to labels for
specific directions.
^
First Coat-Light mist coat, let flash.
^
Second Coat-Light, let flash.
^
Third coat-Heavy double wet coat.
7. Let the wheel dry for 24 hours-(or flash for 30 minutes) or force dry at 60° C (140° F) for 30 minutes, then allow to cool for 30 minutes before
mounting the tire.
INSTALLATION PROCEDURE
1. Balance the wheel and tire assembly.
2. Replace the original balance weights with nylon coated weights to avoid discoloration of the wheel.
3. Install the tire and wheel. Refer to WHEEL INSTALLATION.
