Intrigue V6-3.8L VIN K (1998)
1. Install the transaxle oil cooler hoses.
2. Install the transaxle oil cooler hose bolt/screw.
^
Tighten the transaxle oil cooler hose bolt/screw to 25 Nm (18 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the transaxle oil cooler hoses to the transaxle oil cooler fittings in the transaxle.
^
Tighten the transaxle oil cooler hose fittings to 23 Nm (17 ft. lbs.).
4. Install the transaxle oil cooler hoses to the transaxle oil cooler pipes.
5. Install the transaxle oil cooler clamps to the transaxle oil cooler hoses on the transaxle oil cooler pipes at the radiator.
6. Lower the vehicle.
7. Adjust the fluid level. Refer to the following information:
^
Transmission Fluid Checking Procedure See: Testing and Inspection
^
Approximate Fluid Capacities See: Specifications/Capacity Specifications
^
Fluid and Lubricant Recommendations
8. Inspect for fluid leaks and repair as necessary.
