Intrigue V6-3.8L VIN K (1998)
Wiper Motor Replacement: Installation Procedure
4. Install the wiper drive system module on the vehicle with three screws.
Tighten
Tighten the screws to 10 N.m (88 lb in).
Wiper Motor Replacement: Installation Procedure
5. Install the wiper transmission assembly on the wiper motor crank arm assembly using the J 39529 Wiper Transmission Installer.
6. Install the connector onto the wiper motor assembly.
7. Install the air inlet screen assembly on the vehicle.
8. Install the wiper arm assemblies onto the wiper transmission assembly drive shaft.
9. Operate the wipers and check for proper operation.
