Intrigue V6-3.8L VIN K (1998)
Wiper Motor Linkage: Service and Repair
REMOVAL PROCEDURE
Tools Required
J 39232 Wiper Transmission Separator
Wiper Transmission Replacement: Removal Procedure
1. Remove the wiper arm assemblies from the wiper transmission assembly drive shafts.
2. Remove the air inlet screen assembly from the vehicle.
3. Remove the connector from the wiper motor assembly.
4. Remove the wiper transmission assembly from wiper motor crank arm assembly using the J 39232 Wiper Transmission Separator.
Wiper Transmission Replacement: Removal Procedure
5. Remove three screws and the wiper drive system module from the vehicle.
6. Remove three grommets from the tube frame.