LSS V6-3.8L VIN K (1997)
Radio/Stereo: Service and Repair
Radio Replacement
Description
Remove or Disconnect
1. Open I/P compartment door.
2. Center trim plate assembly by removing two fasteners and carefully pulling rearward.
3. Radio fasteners to I/P
4. Pull radio rearward.
5. Connectors and antenna lead.
6. Radio.
^
Transfer radio mounting brackets if radio is replaced.
Install or Connect
1. Connectors and antenna lead to radio.
2. Radio to I/P.
3. Radio fasteners to I/P.
Tighten
^
Fasteners to 1.9 Nm (17 lb. in.).
4. Center trim plate.
5. Center trim plate fasteners.
Tighten
^
Fasteners to 1.9 Nm (17 lb. in.).