LSS V6-3.8L VIN K (1997)
Front Door Exterior Handle: Service and Repair
Lock Mechanism & Outside Door Handle
Lock Mechanism & Outside Door Handle
Adjust
1. Apply slight downward pressure on the lock lever and upward pressure on lock rod.
2. While lever is held up, rotate the barrel nut until the end of the nut is aligned with the hole in the attaching clip.
Remove or Disconnect
Important
^
Window must be in a full up position.
1. Negative battery cable.
2. Door trim panel. See:
3. Water deflector.
4. Lock rods and linkage.
5. Discard lock rod clips.
6. Two bolts.
7. Handle.
Install or Connect
1. Handle.
2. Two bolts.