LSS V6-3.8L VIN K (1997)
Drink Holders: Customer Interest
Cupholder - Does Not Stay Latched
File In Section: 8 - Chassis/Body Electrical
Bulletin No.: 83-83-13
Date: May, 1998
Subject:
Cupholder Does Not Stay Latched
(Install Service Repair Kit)
Models:
1995-98 Oldsmobile Aurora, Eighty Eight LS, LSS, Regency
Condition
Some customers may comment that the cupholder does not stay latched.
Correction
The following procedure has been developed to replace the cup latch wire and striker (pin assembly) for cupholder door closure.
Procedure
1.
Remove shifter trim plate. Refer to Section 8C in the appropriate Service Manual.
2.
Obtain service replacement kit from GMSPO, P/N 25688508 and follow the instructions and illustrations supplied in the kit.
Parts Information
P/N
Description
25688508
Cupholder Striker Service Kit
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.
