LSS V6-3.8L VIN K (1997)
Oil Filter Adapter: Service and Repair
REMOVAL
1. Remove the four bolts holding the oil filter adapter to the front cover.
2. Remove the oil filter adapter.
3. Remove the oil filter gasket.
4. Remove the oil pressure valve and spring.
5. Clean the parts in suitable solvent and dry.
6. Inspect the oil pressure valve and the valve bore for burrs.
7. Clean the gasket surfaces.
8. Inspect the spring for loss of tension, replace it if in doubt.
INSTALLATION
1. Install the spring into the front cover.
2. Install the oil pressure valve into the front cover.
3. Install the new oil filter gasket.
4. Install the oil filter adapter.
5. Install the oil filter adapter bolts. Tighten the bolts to 30 Nm (22 ft. lbs.).
