LSS V6-3.8L VIN K (1997)
Front Crankshaft Seal: Service and Repair
TOOL REQUIRED
^
J 35354 Seal Installer
REMOVAL
1. Remove the crankshaft balancer and bolt. Refer to Crankshaft Balancer Replacement.
CAUTION: Do not damage the seal bore or the seal contact surfaces.
2. Pry out the seal with a screwdriver.
INSTALLATION
1. Use the Seal Installer in order to install the seal.
^
Use the crankshaft balancer bolt with the tool.
^
Tighten the bolt until the seal is seated in the cover.
2. Remove the Seal Installer.
3. Coat the outside surface of the crankshaft balancer with GM P/N 10522497 lubricant or equivalent.
4. Remove the crankshaft balancer and bolt.