LSS V6-3.8L VIN K (1997)
REMOVE OR DISCONNECT
^
Disable SIR System. See: Body and Frame/Interior Moulding / Trim/Dash Board / Instrument Panel/Air Bag(s) Arming and Disarming
1. Instrument Panel (I/P) assembly.
2. Temperature valve link rod from temperature valve (snap out).
3. Electrical connector from A/C temperature valve actuator.
4. Securing screws and A/C temperature valve actuator.
INSTALL OR CONNECT
1. A/C temperature valve actuator and securing screws.
TIGHTEN
^
Screws to 1.4 Nm (12 lb. in.).
2. Electrical connector to A/C temperature valve actuator.
IMPORTANT
^
Before connecting temperature valve link rod during installation, do the "Temperature Valve Link Adjustment". See: Adjustments
3. Temperature valve link rod to temperature valve.
4. I/P assembly.
^
Enable SIR System. See: Body and Frame/Interior Moulding / Trim/Dash Board / Instrument Panel/Air Bag(s) Arming and Disarming
