LSS V6-3.8L VIN K (1997)
After the inflatable restraint steering wheel module has deployed, the surface of the air bag may contain a powdery residue. This powder consists
primarily of cornstarch (used to lubricate the bag as it inflates), and by-products of the chemical reaction. The deployment reaction produces sodium
hydroxide dust (similar to lye soap). The sodium hydroxide quickly reacts with the atmospheric moisture. This atmospheric moisture converts the sodium
hydroxide into sodium carbonate and sodium bicarbonate (baking soda). Therefore, you will probably find no sodium hydroxide present after the
deployment. As a precaution, gloves and safety glasses are recommended. Gloves and safety glasses help to prevent possible irritation of the skin or
eyes.
Remove or Disconnect
REMOVE OR DISCONNECT
^
Disable SIR system, refer to Disabling the SIR System. See: Air Bag(s) Arming and Disarming
1. The I/P upper trim pad.
2. The fasteners from the inflatable restraint I/P module.
3. The inflatable restraint I/P module from the vehicle.
CAUTION: When you are carrying an undeployed inflator module:
^
Do not carry the inflator module by the wires or connector on the inflator module.
^
Make sure the bag opening points away from you.
