LSS V6-3.8L VIN K (1997)
Acceleration Sensor: Service and Repair
REMOVE OR DISCONNECT
1. Move driver seat forward.
2. Cut carpet back under driver seat to expose lateral accelerator switch (3).
3. Electrical connector (9) from switch.
4. Two screws (10).
5. Lateral accelerator switch.
INSTALL OR CONNECT
CAUTION: Always use the correct fastener in the correct location. When you replace a fastener, use ONLY the exact part number for that application.
The Manufacturer will call out those fasteners that require a replacement after removal. The Manufacturer will also call out the fasteners that require
thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors)
on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and the joint clamping force, and may
damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you avoid
damage to parts and systems.
1. Lateral accelerator switch (3) and two screws (10).
2. Electrical connector (9) to switch.
3. Carpet.
