LSS V6-3.8L VIN K (1997)
Adjust:
1. Loosen strut to knuckle mounting nuts.
2. Using tool J 29862.
^
Tighten strut to knuckle mounting nuts to 190 Nm (140 ft. lbs.).
3. Remove tool J 29862.
Rear Toe Adjustment
NOTE:
^
Make left and right rear toe adjustments separately, per wheel, using the following procedure.
^
Adjustment link must be adjusted to the full toe-out position and then adjusted inward to the correct setting. The proper alignment can only be
made when the adjustment direction is from toe-out to toe-in.
Adjust:
1. Loosen lock nut on adjustment link.
2. Rotate the adjustment link to adjust toe.
^
Tighten lock nut to 64 Nm (47 ft. lbs.).