LSS V6-3.8L VIN K (1997)
B. Replace leaking seal.
C. Check component sealing surfaces for damage.
D. Reset torque to specifications where required.
E. Bleed system.
Some complaints about the power steering system may be reported as:
1. Fluid leakage on garage floor.
2. Fluid leaks visible on rack and pinion gear or pump.
3. Growling noise, especially when parking or when engine is cold.
4. Loss of power steering when parking.
5. Heavy steering effort.
When troubleshooting these kinds of complaints, check for an external leak in the power steering system.
EXTERNAL LEAKAGE CHECK
The purpose of this procedure is to pinpoint the location of the leak. In some cases, the leak can easily be located. Seepage-type leaks may be more
difficult to isolate. To locate seepage leaks, use the following method.
1. With the engine off, wipe dry the complete power steering system (rack and pinion gear, pump, hoses and connections).
2. Check the fluid level in the pump's reservoir. Add fluid if necessary.
3. Start the engine, then turn the steering wheel from stop to stop several times. Do not hold it at a stop for any length of time, as this can damage the
power steering pump. It is easier if someone else operates the steering wheel while you search for the seepage.
4. Find the exact area of the leak.
