Ninety-Eight V6-252 4.1L VIN 4 4-BBL (1982)
Air Injection Control Valve: Testing and Inspection
High Vacuum Air Control Valve
1. Start engine and allow to reach normal operating temperature.
2. With engine idling, apply a minimum of 10 in Hg vacuum to high vacuum mode assembly. Air should divert to air cleaner. If not, replace control
valve.
NOTE:
-
SEE EMISSION CONTROL APPLICATION CHARTS to determine application of control switches and valves.
-
Refer to the number stamped on the base of the switch or valve for calibrated switching or activation temperatures.