Ninety-Eight V6-252 4.1L VIN 4 4-BBL (1982)
Compressor/Pump: Service and Repair
Air Compressor Service
Fig. 38 Air compressor, disassembled
Disassembly
1.
Remove the seven compressor cover screws, then the compressor cover and gasket, Fig. 38.
2.
Remove head and solenoid assembly.
3.
Remove two filters, exhaust valve, spring and air dryer O-ring from head assembly.
4.
Remove solenoid from head by lifting slightly and sliding to the dryer outlet side.
5.
Remove O-ring from solenoid assembly.
6.
Remove head gasket from cylinder assembly.
7.
Remove four mounting bracket screws, then the bracket and gasket. Note position of ground wire for installation.
