Ninety-Eight V6-3800 3.8L (1989)
3.
Set the next two digits (0-99) of your code with the scan button.
"123"
4.
Press the am-fm button to enter the first three digits.
"000"
5.
Again, use seek to set the 4th digit
(0-9) of your code.
"400"
6.
Set the last two digits (0-99) of your code with the scan button.
"456"
7.
Press the am-fm button to enter the last 3 digits of your code.
Radio is unlocked and clock is displayed.
"1:00"
IMPORTANT:
If the backup code(s) received from the computer do not unlock the radio, another possible code is all 0's. When entering the
code after step 1 above, press the AM-FM button twice.
IMPORTANT:
If 8 unsuccessful tries are made to unlock the radio, the display will return to the "LOC" display, but when you press the set
button, "INOP" will be displayed. This means the radio must be left powered up for 1 hour with battery and ignition applied
before any more attempts to unlock the radio can be made. Anytime "INOP" is displayed, 3 more attempts will be allowed after
the 1 hour waiting period with battery and ignition applied.
B.
TO REMOVE CUSTOMER'S CODE-Deactivate Theft Deterrent From Unlocked Mode, Deterrent Activated.
1.
With the radio off, hold in presets 1 and
4 for about 4 seconds until the display changes to
"SEC".
IMPORTANT:
If the display changes to the theft deterreiit is already deactivated.
2.
Press the set button
"000"
3.
Set the first digit (0-9) of your code with the seek button.
"100"
4.
Set the next two digits (0-99) of your code with the scan button.
"123"
5.
Press the am-fm button to enter the first three digits.
"000"
6.
Again, use seek to set the 4th digit (0-9) of your code.
"400"
7.
Set the last two digits (0-99) of your code
with the scan button.
"456"
8.
Press the am-fm button to enter the last
3 digits of your code.
"1:00"
Theft deterrent is deactivated and then
"---"
clock is displayed
"1:00"
C.
TO ADD CUSTOMER'S CODE-Set User Code (activate) From Unlocked Mode, Deterrent Deactivated
1. With the radio off, hold in presets 1 and 4
for about 4 seconds until the display changes
to "---"
"---"
IMPORTANT:
If "SEC" is displayed, the theft
"SEC"
deterrent is already activated. This
means the old code must be removed
first before entering a new code.
2.
Press the set button.
"000"
3.
Set the first digit (0-9) of your code with the seek button.
"100"
4.
Set the next two digits (0-99) of your code with the scan button.
"123"
5.
Press the am-fm button to enter the first three digits.
"000"
6.
Again, use seek to set the 4th digit (0-9) of your code.
"400"
