oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Ambient Temperature Sensor / Switch HVAC > < A/T - Temperature Control Cable Adjustment
Page 1
background image

Air Door Cable: Customer Interest
A/T - Temperature Control Cable Adjustment

SUBJECT

TEMPERATURE CONTROL CABLE ADJUSTMENT

(PROCEDURE)

MODELS/YEARS

1989 NINETY-EIGHT REGENCY AND EIGHTY-EIGHT

ROYALE

NUMBER:

89-T-69

CORP.  REF. NO: 901101

DATE:

April 1989

SECTION:

1B

Figure 1

In the event of customer comments on heating and/or cooling not meeting their expectations are encountered on the above styles equipped with C60 air
conditioning, the following procedure should be used to correct the condition:

1.

Lower glove compartment to gain access to the control cable turnbuckle. (Refer to Figure 1)

2.

With control at full cold position, adjust turnbuckle until temperature door just comes to a stop on the left.

3.

Move control to full hot position and feel if door is held against right side.

4.

If not, adjust turnbuckle until door just stops against right side.

5.

Recheck cold side to assure door is tight against stop on left. If not, repeat Steps 1 thru 4.

Ambient Temperature Sensor / Switch HVAC > < A/T - Temperature Control Cable Adjustment