Ninety-Eight V6-3800 3.8L (1989)
Turn Signal Switch: Service and Repair
Fig. 14 Compressing Lock Plate
Fig. 15 Centering Coil Assembly
Disable the Supplemental Inflatable Restraint (SIR) system as described in MAINTENANCE PROCEDURES/AIRBAG SYSTEM
DISARMING prior to working on or near the steering column.
1.
Disconnect battery ground cable.
2.
Remove steering wheel as described in STEERING WHEEL.
3.
On models with inflatable restraint, remove coil assembly retaining ring, then the coil assembly from shaft. Allow coil assembly to hang freely.
4.
On all models, using lock plate compressing tool J-23653-A, compress lock plate and pry snap ring from shaft groove, Fig. 14. Slowly release
lock plate compressor and remove tool and lock plate from shaft end.
5.
Slide cancelling cam and upper bearing preload spring from end of shaft.
6.
Remove turn signal switch lever.
7.
Remove hazard warning knob retaining screw, button, spring and knob.
