Ninety-Eight V6-3800 3.8L (1989)
Figure 4 - SIR Coil Assembly Head Seating Orientation
7.
Align the SIR coil "locating bump" between the two tabs in the steering column cover (See Figure 4).
8.
Continue to pull down on the lower coil wires, keeping them straight with no slack, while seating the SIR coil head in the steering column.
9.
Assemble the coil retaining ring.
10
Hold all wires straight and tight while installing the wire protector into the I.P. bracket on the bottom
of the jacket assembly.
11.
Refer to the vehicle service manual to complete reassembly and installation of the column. (See section 3F).
