Ninety-Eight V6-3800 3.8L (1989)
Camshaft Position Sensor: Service and Repair
Computer Command Control - Port Fuel Injection
Camshaft And Crankshaft Sensors
Camshaft Sensor
REMOVAL AND INSTALLATION
1.
Disconnect battery ground cable.
2.
Remove water pump pulley attaching bolts, then the serpentine belt and water pump pulley.
3.
Disconnect sensor wiring connector and remove sensor retaing bolt.
4.
Twist and pull sensor to remove.
5.
Reverse procedure to install and prior to installing new sensor, lubricate sensor O-ring.