Ninety-Eight V6-3800 3.8L (1989)
REMOVE OR DISCONNECT
1. Regulator.
2. Motor by drilling out rivets holding motor to regulator using a 4.8 mm (3/16") drill bit.
INSTALL OR CONNECT
1. Motor to regulator using 3/16" rivets.
2. Regulator.
Manual Window
REGULATOR TAPE
REMOVE OR DISCONNECT
1. Trim panel and water deflector.
2. Safety belt retractor.
3. Regulator.
4. Separate block from guide by placing a flat-bladed into the slot and pushing downward.
5. Block from tape.
6. Slide guide and sash from regulator.
7. Tape from tabs on regulator and wind handle to remove tape from regulator.