Ninety-Eight V6-3800 3.8L Supercharged (1993)
Keyless Entry Transmitter: Service and Repair
^
Do the following when replacing Remote Accessory Control (RAC) Module or either transmitter.
1. Turn Ignition Switch to OFF.
2. Jumper Data Link Connector (DLC) terminal G (PPL/WHT) to terminal A (BLK/WHT). Door locks (including fuel door) lock and unlock, and
luggage compartment lid release activates in approximately 2 seconds.
3. Press any button on one transmitter. Door locks (including fuel door) lock and unlock, and luggage compartment lid release activates in
approximately 2 seconds. The first transmitter is now programmed.
4. Repeat step 3 using the other transmitter. If only one transmitter is being used, go to step 5.
5. Disconnect jumper from DLC.
