Ninety-Eight V6-3800 3.8L Supercharged (1993)
Removing Or Installing Shaft Seal
6. Fully engage the knurled tangs of Seal Remover/Installer J 23128-A into the recessed portion of the Seal by turning the handle clockwise. Remove
the Seal from the compressor with a rotary-pulling motion. Discard the seal. The handle must be hand- tightened securely. Do not use a wrench or
pliers.
Removing And Installing Shaft Seal O-Ring
7. Remove and discard the seal seat O-ring from the compressor neck using O-ring remover J 9553-01.
