Ninety-Eight V6-3800 3.8L Supercharged (1993)
3.
Position the tool on the crankshaft.
4.
Install the bolts to hold the pedestal to the block face, torque to 30 N-m (22 lb.ft.).
5.
Torque the pedestal pinch bolt to 4 N-m (35 lb. in.).
6.
Remove tool J-37089.
7.
Install the foreign object deflector.
8.
Place tool J-37089 on the harmonic balancer and rotate the tool. If any vane of the harmonic balancer touches the tool, replace the balancer
assembly.
9.
Install the balancer on the crankshaft.
10.
Apply thread sealer GM # 1052080 or equivalent to threads of the crankshaft balancer bolt. Using J-36660 Torque Angle Meter, torque the bolt to
150 N-m + 76 degrees (110 lb.ft. + 76 degrees).
11.
Install the inner fender shield.
12.
Install the tire and wheel assembly. Torque lug nuts to 140 N-m (104 lb.ft.).
13.
Lower the vehicle.
14.
Install the serpentine belt.
