Ninety-Eight FWD V6-181 3.0L (1985)
Technical Service Bulletin # 85T15
Date: 850201
Paint - Basecoat/Clearcoat Repair Systems
SUBJECT
BASECOAT/CLEARCOAT REPAIR SYSTEMS
NUMBER: 85-T-15
DATE:
Feb. 6, 1985
MODELS/YEARS
1985 CALAIS & NINETY-EIGHT
SECTION:
10
The repair systems contained in this bulletin are recommended as a guide when repairing basecoat/ clearcoat exterior finishes on the above styles.
The following procedures outline a method for making spot/partial and full panel repairs on nonflexible parts and full panel repairs on flexible parts.
Nonflexible Panel Repair System
Basecoat - Lacquer or Enamel
1.
Wash with a mild detergent and water to remove any water soluble contaminates, then clean with wax and grease removing solvent to remove any
tar, silicone or other road film not removed with the detergent wash.
2.
Repair and featheredge damaged area(s) as required.
3.
If substrate is metal, treat surface with a metal conditioner and conversion coating according to label directions. Allow to dry thoroughly and apply
primer-surfacer to repair area. Allow to dry 20-30 minutes before sanding.
