Ninety-Eight FWD V6-181 3.0L (1985)
FIGURE 2
b.
Spray two medium-wet coats of reduced clearcoat at 35-45 lbs. air pressure at the gun. Allow first coat to flash completely before applying the
second coat. At least two coats must be used. Additional coats may be applied if desired. If additional leveling is desired, a final coat of premixed
mist-coat material (clear acrylic and thinner) can be sprayed at 20 lbs. air pressure at the gun. When no breaklines are present, blend all spray
applications within the adhesion promoter (Figure 1 or 2). Allow the repair to dry overnight, then rub out with a light-cutting hand or machine
polishing compound.
Flexible Panel Repair System
Procedure - Full Panel
Full panel repairs must be performed; spot repairs are not recommended.
CAUTION: There are a number of flexible paint systems available for service use; however, many require additives containing isocyanates. It is
essential that all recommendations and warnings listed on the container label for materials selected be followed.
It is mandatory that adequate respiratory protection be worn. Examples of such protection are: 3-M models No.6984 and No.6986 disposable respirators.
