Ninety-Eight FWD V6-181 3.0L (1985)
Install:
^
New Rear Main Bearing Oil "Rope" Seal (All Except 3800 TPI)
^
# 4 (Rear) Main Bearing Cap in block
^
Side seal, P/N 24500058, with gray rubber seal material facing the block
Note:
Use the seal "handle" to guide the seal into place and then tap the "handle" lightly to disengage the "handle" from the seal. Using the "handle" as a
wedge, drive it between the cap and block behind the seal. This will wedge the seal against the block. (See Section A-A and View B).
^
New Rear Main Seal (1990-92 3800 TPI)
^
Oil Pan
^
Flywheel (1990-92 3800 TPI)
