Ninety-Eight FWD V6-181 3.0L (1985)
resulting damage and/or personal injury.
FIGURE 1
If tires are replaced, put the two (2) new tires on the front and move the front tires to the rear position. After 7,500 miles, tires should be rotated
following the modified "X" pattern. See Figure 1.
If the tires are not replaced, rotate the tires using the modified "X" pattern. This will tend to even out normal heel/toe tread wear.
PARTS INFORMATION
One (1) shim kit part number 14094481.
Kit includes:
Two (2) shims (part number 14094467) Eight (8) bolts (part number 25519720) One (1) instruction sheet (part number 14094482)
WARRANTY INFORMATION
Trouble Code
Labor Operation
Labor Hours
92
T1141
.7
Technical Service Bulletin # 86T12
Date: 860101
Tire - Irregular Wear
SUBJECT
IRREGULAR TIRE WEAR
NUMBER: 86-T-12
DATE:
Jan. 15,1986
MODELS/YEARS
ALL MODELS
SECTION: 3
Front Position Tire Wear on Rear-Wheel-Drive Vehicles With All Season Tires
Some rear-wheel-drive vehicles may exhibit premature tire wear on the front tires. The wear usually starts on the outer tread row and may progress
across the full tread. This wear also usually appears as a heel and toe (high and low) wear pattern on individual tread blocks which can eventually lead to
tire noise and/or tire roughness.
Small amounts of heel/toe wear on the outer tread is considered normal. This wear is characteristic of new tires at full tread depth on free-rolling axles..
Turning and cornering exaggerates front tire wear. Routine tire rotation at 7,500 miles using the modified "X" method as shown in the Owner's Manual