Ninety-Eight FWD V6-181 3.0L (1985)
Wheel Hub: All Technical Service Bulletins
Hub Assembly Seal - Squeak/Squawk Noise
NUMBER:
91-T-235
CORP. REF. NO:
203501
DATE:
March 1992
SECTION:
3C
SUBJECT
HUB ASSEMBLY SEAL SQUEAK/SQUAWK NOISE - LUBRICATE HUB AND SEAL AREA
MODEL/YEARS
1985-91 EIGHTY EIGHT, NINETY EIGHT, TORONADO AND 1990-91 SILHOUETTE
CONDITION:
Some owners of 1985-91 Eighty Eight, Ninety Eight, Toronado And 1990-91 Silhouette models may comment about a squeak or squawk noise coming
from the front of the vehicle in or near the front wheels. This condition may be caused by insufficient grease on the lip seal of the hub assembly.
CORRECTION:
Disconnect the Hub Assembly following the service manual "On-Vehicle Service" procedure for front suspension in Section 3C. Lubricate the Hub and
Seal area with GM1052497 grease. Fill the cavity between the seal and bearing.
Note:
For 1992 model vehicles, this condition has been eliminated with the introduction of a new Hub Assembly design, which requires no lubrication.
